Posted by ServicefryLeave a Comment on Washing Machine Not Spinning Properly? Common Causes & Easy Solutions

Washing Machine Not Spinning Properly? Common Causes & Easy Solutions

Technician Diagnosing Washing Machine Spinning Issue

A washing machine that suddenly stops spinning can create a lot of frustration, especially when your clothes come out wet after the wash cycle. This is one of the most common appliance problems faced in Indian homes.

In many cases, the issue may be simple and fixable. However, some situations require professional repair support.

Common Reasons Why a Washing Machine Is Not Spinning

1. Unbalanced Load

If heavy clothes are collected on one side of the drum, the washing machine may stop spinning automatically to protect the motor.

2. Drainage Problem

If water is not draining properly, the machine may not enter the spin cycle.

3. Faulty Lid Switch

In top load washing machines, the spin cycle may stop if the lid switch is damaged.

4. Motor or Belt Issue

Worn-out belts or motor problems can reduce spinning performance.

5. Overloading

Overloading the machine regularly can affect drum movement and motor efficiency.

Basic Things You Can Check at Home

  • Reduce the load and restart the machine
  • Check if the drain pipe is blocked
  • Clean the lint filter
  • Ensure proper power supply
  • Restart the machine after a few minutes

When You Should Call a Technician

You should contact a professional technician if:

  • The drum is not rotating at all
  • Burning smell is coming from the machine
  • Loud noise occurs during spinning
  • Water remains inside the drum
  • The machine repeatedly stops during wash cycles

Professional Washing Machine Repair Service

Servicefry provides professional washing machine repair service for front load, top load and fully automatic washing machines. Our technicians diagnose the issue at your doorstep and provide reliable repair support.

Posted by ServicefryLeave a Comment on How to Clean Front Load Washing Machine

How to Clean Front Load Washing Machine

How to Clean Front Load Washing Machine

How to Clean a Front Load Washing Machine – Step-by-Step Guide

Front load washing machines are known for their efficiency and gentle fabric care, but they require regular cleaning to maintain performance and hygiene. Without routine cleaning, these machines can develop unpleasant odors, mold, mildew, and residue buildup.

In this guide, we’ll show you exactly how to clean a front load washing machine, inside and out, using both DIY and store-bought solutions.


Why Cleaning Your Front Load Washing Machine Is Important

  • Eliminates odor-causing bacteria
  • Prevents mold and mildew in the rubber gasket
  • Improves wash performance and energy efficiency
  • Prolongs the machine’s lifespan

What You’ll Need

For natural cleaning:

  • White vinegar
  • Baking soda
  • Microfiber cloth
  • Old toothbrush
  • Hot water

For deep cleaning:

  • Washing machine cleaner (like Dr. Hyjin DescaleXpert or similar)
  • Hydrogen peroxide (optional for mildew)
  • Spray bottle

Step-by-Step Cleaning Process

1. Clean the Door Gasket (Rubber Seal)

The rubber gasket traps moisture and detergent, making it a breeding ground for mold.

Steps:

  • Pull back the rubber seal gently.
  • Wipe away visible debris, lint, and detergent buildup.
  • Spray a solution of 1:1 white vinegar and water or hydrogen peroxide.
  • Scrub using an old toothbrush.
  • Wipe dry with a clean cloth.

Tip: Leave the door open after each wash to prevent moisture buildup.


2. Clean the Detergent Dispenser Drawer

The dispenser drawer holds detergent and fabric softener, which can become sticky and moldy.

Steps:

  • Remove the drawer completely (refer to your manual).
  • Soak in warm soapy water for 15–20 minutes.
  • Use a toothbrush to scrub residue.
  • Rinse and dry thoroughly.
  • Wipe the slot inside the machine too.

3. Run a Cleaning Cycle (Drum Clean)

This removes internal dirt, limescale, and detergent buildup from the drum and hoses.

Option A: With Vinegar and Baking Soda

  • Add 2 cups of white vinegar to the detergent compartment.
  • Sprinkle ½ cup of baking soda directly into the drum.
  • Run the machine on the hottest and longest cycle (usually a drum clean cycle).

Option B: With Washing Machine Descaler

  • Use a descaling powder like Dr. Hyjin DescaleXpert.
  • Add it to the drum as directed.
  • Run a hot cycle without clothes.

Do not mix vinegar and store-bought cleaner. Use one method per cycle.


4. Clean the Drain Pump Filter

Located at the bottom front of the machine, the drain pump filter catches lint, coins, and debris.

Steps:

  • Turn off the machine and unplug it.
  • Place a towel and shallow tray beneath the filter panel.
  • Unscrew the filter cap and let water drain out.
  • Remove debris and rinse the filter thoroughly.
  • Screw it back in tightly.

5. Wipe the Exterior

Don’t ignore the outside!

  • Use a mild cleaning solution (vinegar + water) to wipe down:
    • Door glass
    • Control panel
    • Machine sides and top

How Often Should You Clean Your Washing Machine?

TaskFrequency
Wipe gasket and drumAfter every wash
Clean detergent drawerMonthly
Run drum clean cycleEvery 2–4 weeks
Clean drain pump filterEvery 2–3 months

Bonus Tips to Keep It Fresh

  • Leave the door and detergent drawer open after each use.
  • Use high-efficiency (HE) detergent to reduce buildup.
  • Avoid fabric softeners—use vinegar instead as a natural softener.
  • Never overload your machine.

Final Words

Cleaning your front load washing machine is not just about hygiene; it’s about performance and durability. With just 30 minutes a month, you can avoid odors, breakdowns, and costly repairs.

Your washing machine keeps your clothes clean—return the favor.